| NVR: NRM303 |
| CPU |
4th generation Intel® Core™ dual core i7-4650U, 1.7GHz |
| Memory |
2-channel 204-pin DDR3L SO-DMIM socket support 1333/1600MHz up to 16GB, default with 2GB memory |
| Storage |
2 x 2.5” SATA 3.0 SSD/HDD of trays, lockable storage(optional), Raid 0, 1 supported
1 x CFast slot |
| Expansion |
1 x full size Mini-PCIe socket (USB 2.0), 1 x full size Mini-PCIe socket (USB 2.0 + PCIe)
1 x full size Mini-PCIe socket (USB 2.0+PCIe),1 x Half size mini-PCIe socket (USB 2.0+PCIe) |
| Operating System |
Support Windows 7, WES7, Windows 8, WES8, Linux kernel 3.X |
| GPS and On Board Sensor |
1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou
Optional modules with Dead Reckoning available, Built-in G-sensor |
| I/O Interface-front |
4 x LED indicators for power/storage/WLAN/WWAN
1x Power Switch
2x External accessible SATA 3.0 SSD/HDD tray, Raid 0,1 supported
1 x CFast socket with cover
1 x Reset button
1x dual USB type A connectors for 1 x USB 3.0 + 1 x USB 2.0 port
output), 1 x direction signal for optional Dead Reckoning, module
2 x externally accessible SIM card sockets (selectable)
3x antenna holes for WWAN/WLAN/BT
1x Phone Jack 3.5mm for Mic-in
1x Phone Jack 3.5mm for Line-out |
| I/O Interface-rear |
1x Circle Type DC input with ignition
NRM311-24V: 24VDC(16.8V~31.2V) input with 4KVDC isolation
NRM311-36V: 36VDC(25.2V~46.8V) input with 2KVDC isolation
NRM311-48V: 48VDC(33.6V~62.4V) input with 4KVDC isolation
NRM311-110V: 110VDC(77V~142V) input with 4KVDC isolation
1x Dual USB type A connector for USB3.0 port + USB 2.0 port
2x M12 10/100/1000 Ethernet
1x Phone Jack 3.5mm for 1xMic-in
1x Phone Jack 3.5mm for Line-out with 1.5W output each
1x DB-15 VGA resolution up to 2560x1600@60Hz
1xDP-15, resolution up to 2560x1600@60Hz
2xDB-9 RS-232
1xDB-9 RS-232/422/485(RI/5V/12 Selectable)
1x16-pin terminal block:
- 1xCAN Bus 2.0B(on board)
- 1xOptional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
- 8xProgrammable GPIO
Digital input: Input voltage(internal type): 5VDC TTL(default), max current: 20mA
Input voltage(source type): 3-12VDC
Digital output: Output voltage(sink type): 5VDC TTL(default), max current: 20mA
Input voltage(source type): 3-18VDC, max current: 150mA
4xAntena hole for WWAN/WLAN/BT/GPS
1x Fuse(15A) |
Power Management |
Ignition On/Off control
Programmable On/Off delay timer
System wake up event: Ignition switch/RTC timer ALARM interrupt/Cellular MODEM wakeup signal
System wake up condition: Wake up event is triggered, and DC input voltage is greater than UVP threshold
Timer delay is only applicable for ignition on
System power down condition: Soft off, or Ignition off, or DC input voltage is lower than UVP threshold
Timer delay is only applicable for Ignition off |
| Environment |
Operating temperatures: -40°C to 70°C (w/ industrial SSD) with air flow
Operating temperatures: -20°C to 45°C (w/ industrial SSD) with air flow
Storage temperatures: -40°C to 85°C
Relative humidity: 10% to 90% (non-condensing) |
| Dimension/Weight |
260mm (W) x 206mm (D) x 130mm (H) (10.24” x 8.11” x 5.12”), 3.3kg |
| Certification |
CE approval, FCC Class B,
EN50155 conformity
- Ambient Temperature EN50155 TX(-40° ~70°C )
- Shock and Vibration IEC61373 class B
- Interruptions of voltage supply class S1, S2
- Supply change over class C1, C2
- EMC EN50121-3-2 |
| Ordering information |
NRM311-24V: 24VDC(16.8V~31.2V) input with 4KVDC isolation
NRM311-36V: 36VDC(25.2V~46.8V) input with 2KVDC isolation
NRM311-48V: 48VDC(33.6V~62.4V) input with 4KVDC isolation
NRM311-110V: 110VDC(77V~142V) input with 4KVDC isolation |
.png)
.png)
.png)
.png)
.png)
